WINDFORCE 3X COOLING SYSTEM
The WINDFORCE 3X cooling system features 3x 82mm unique blade fans, alternate spinning fan, 5 composite copper heat pipes, heat-pipe direct touch and 3D active fan functionality, together delivering an effective heat dissipation capacity for higher performance at lower temperatures.
The GIGABYTE “Alternate Spinning” is the only solution that can solve the turbulent airflow of three fans. The biggest problem with the three fans is turbulence. Since the fans rotate in the same direction, the airflow direction is opposite between the fans, which will cause turbulent airflow and reduce heat dissipation efficiency. GIGABYTE turns the middle fan in the opposite direction, so that the airflow direction between the two fans is the same, reducing the turbulence and enhancing the airflow pressure.
UNIQUE BLADE FAN
The airflow is spilt by the triangular fan edge, and guided smoothly through the 3D stripe curve on the fan surface, effectively enhancing the airflow.
PROTECTION METAL BACK PLATE
The metal back plate not only provides an aesthetical shape, but also enhances the structure of the graphics card to provide complete protection.
The graphics card uses the better power phases design to allow the MOSFET to operate at lower temperature, and over-temperature protection design and load balancing for each MOSFET, plus the Ultra Durable certified chokes and capacitors, to provide excellent performance and longer system life.
Graphics Processing GeForce® RTX 2070 SUPER™
Core Clock 1770 MHz
CUDA® Cores 2560
Memory Clock 14000 MHz
Memory Size 8 GB
Memory Type GDDR6
Memory Bus 256 bit
Memory Bandwidth (GB/sec) 448 GB/s
Card Bus PCI-E 3.0 x 16
Card size L=286 W=114 H=50 mm
PCB Form ATX
Recommended PSU 650W
Power Connectors 8 Pin*1, 6 Pin*1
Output: DisplayPort 1.4 *3 + HDMI 2.0b *1